Résultats pour
SYSCOM-PROREP
France
Lecteur / Writer prenant en charge presque tous les 125 kHz, 134,2 kHz et 13,56 MHz tags et / ou labels. Support ATMEL, EM, ST, NXP, TI, HID, LEGIC, etc. et les normes ISO comme ISO14443A/B (T=CL), ISO15693, ISO18092 / ECMA-340 (NFC). 125 kHz / 134.2 kHz and 13.56 MHz tags and/or labels. TWN4 MultiTech also supports all major transponders from various suppliers like ATMEL, EM, ST, NXP, TI, HID, LEGIC, and ISO standards like ISO14443A (T=CL ), ISO14443B (T=CL), ISO15693, ISO18092 / ECMA-340 (NFC). Key features of the TWN4 MultiTech include a powerful SDK for writing Apps which are executed directly on the reader, infield upgradeable firmware, direct chip-commands support, and additional interfaces for the OEM PCB version. TWN4 MultiTech simultaneously reads more than fifty RFID technologies from both the low frequency (LF) and high frequency (HF) bands, including NFC.
Demander un devisSYSCOM-PROREP
France
The GS12281 is a lowpower, multirate, retiming cable driver supporting rates up to 12G UHDSDI. It is designed to receive 100Ohm differential input signals, automatically recover the embedded clock from the digital video signal and retime the incoming data, and transmit the retimed signal over 75Ohm coaxial cables. The 100Ohm trace input supports up to 17dB of insertion loss.The device supports SMPTE ST 20821 (12G UHDSDI), ST 20811 (6G UHDSDI), ST 424 (3G SDI), ST 2921 (HDSDI) and ST 259 (SDSDI). In addition to standard SMPTE rates, the device also supports retiming of DVBASI at 270Mb/s, MADI at 125Mb/s, and 10GbE. The two cable drivers have highly configurable preemphasis and swing controls to compensate for long trace and connector losses. Additionally, automatic and user selectable output slew rate control is provided for each cable driver output.
Demander un devisSYSCOM-PROREP
France
The GS3441 is a highspeed BiCMOS integrated circuit designed to equalize and restore signals received over 75ohm coaxial cable. The device is designed to support SMPTE ST 424, SMPTE ST 292 and SMPTE ST 259, and is optimized for performance at 270Mb/s, 1.485Gb/s and 2.97Gb/s. The GS3441 features DC restoration to compensate for the DC content of SMPTE pathological test patterns. The Carrier Detect output pin (CD) indicates whether a valid input signal has been detected. It can be connected directly to the SLEEP pin to enable automatic powerdown upon loss of carrier. A voltage programmable threshold, which can be changed via the SQ_ADJ pin, forces CD high when the input signal amplitude falls below the threshold. This allows the GS3441 to distinguish between lowamplitude SDI signals and noise at the input of the device. The equalizing and DC restore stages are disengaged when the BYPASS pin is HIGH. No equalization occurs in Bypass mode.
Demander un devisVous vendez ou fabriquez des produits similaires ?
Inscrivez-vous sur europages et référencez vos produits
Résultats pour
Support st - Import exportNombre de résultats
3 ProduitsPays
Type d'entreprise